10 Ways Entrepreneurs Can Change the Social & Economic Story

Men and women who create for-profit and nonprofit new ventures can and should do things of the kind that the President-Elect is likely to neglect, negate, or avoid. Entrepreneurs can quietly change the story, one organization at a time, whatever government may or may not do.

Here are ten ways venture founders can alter the course implied by what we know of Donald Trump’s intentions. They are all within our own authority, not those of government. We can:

  1. actively appreciate the economic and social needs of disadvantaged groups and consider how our own organization can make a difference-or start a new one that can; at least ensure that our own organization does not contribute to disadvantage;
  2. be inquisitive about rural and underserved populations adversely impacted by political, economic and tech change-and examine ways that our organization can make a positive contribution, including the offer of products, services or employment;
  3. create inclusive policies on gender, gender identity, race, national origin & religion; offer all employees dignity & respect, provide healthcare, parental leave, clear policies on sexual harassment, & the opportunity for participation in decision-making and sharing organizational success;
  4. take the opportunity to participate in the life of local communities to mutual advantage, through direct civic engagement, as well as supporting employee volunteering; become involved in community supported enterprises;
  5. evaluate all practices of the organization that may contribute directly or indirectly to climate change-and introduce ways that will reduce pollution; seek to be powered by clean energy and move to zero waste;
  6. ensure that the pay ratio between the highest and lowest paid members of the organization does not exceed 20:1 (as it was in 1965) to reduce financial inequity, given that the ratio between average American CEO pay and worker pay is now 303:1;
  7. re-examine the consequences of all purchasing decisions, in order to avoid pain and hardship, either in supplier organizations or the local and global community; research supplier behaviors on socio-economic parameters;
  8. commit to support the lifelong learning of all members of the organization, regardless of where they are starting or what position they hold-through internal development programs and external qualifications;
  9. employ socially responsible financial policies that do not disfavor any stakeholder, either close at hand or nationally, as well as avoiding immoral or self-serving practices, such as the avoidance of repatriating foreign profits;
  10. build a widely communicated progressive corporate story that is reflected through the behaviors of everyone in the organization and enshrined in all official organizational procedures; regularly monitor its reality.
  11. GEI scores 137 countries on 14 pillars of a healthy entrepreneurship ecosystem

Posted in Uncategorized | Comments Off on 10 Ways Entrepreneurs Can Change the Social & Economic Story

Top 5 Features Added in Revit

A building information modeling (BIM) software, Autodesk Revit, has been useful for architects, structural engineers, MEP engineers, designers and contractors, enabling them to design structures and buildings in 2D and 3D, as well as being 4D BIM capable. It’s first version was released more than a decade back and since then it has seen many updates and new version releases, some have been just incremental updates serving for bug corrections and some have been significant technological updates.

Compared to the 2017 update, the previous 2 editions did not provide any significant upgrade until their ‘release 2’ (R2) editions were released. The 2017 update brings about 50 new, refreshing features which will prove to be immensely useful in creating BIM models. All the new features within the update are equally important and will be useful during the life cycle of a project, but out of those let us discuss the 5 most important features from Revit 2017. 1. Text Editing:

The most awaited feature in Revit since the time it was introduced, text editor has been included in the latest edition of Autodesk Revit. This provides a completely redesigned text engine which is compatible with imported files such as AutoCAD DWG files. The text editor in Revit 2017 also brings corrections to the flaws of text editor from earlier editions and lets users seamlessly switch between text editing mode and viewing mode without causing any unexpected disruptions in text.

2. Global Parameters:

Global parameters feature which was introduced in Revit 2016 R2 version, has received a much needed update in the 2017 edition. The latest update brings in the power of parametric families into the project environment. Applying global parameters to multi-segments is possible in this version, also grouping the parameters becomes easier, as does filtering and reordering. Even though the upgrades do seem to bring a lot of additional features, they do come with their limitations, such as the parameters can only be assigned to certain system family categories and only to user defined instance properties.

3. View Template:

View template is a very simple yet powerful feature added in Revit 2017 which enables the user to share data and reuse schedules. This feature automatically updates all the schedule changes whenever they are affected within their respective templates.

4. Calculated Values in Annotations:

An essential and a long overdue feature introduced in Revit 2017 is Calculated Values in Annotations. It is a useful feature that allows the user to document projects with annotations that allow calculated values and which obey pin restrictions maintaining consistency and accuracy of the project. A tag created with calculations in it can be used with any tag type and pinned to an element allowing the user to reposition that element without actually moving the pin position.

5. Railing Host:

Railing Host or Hosted Railings, is another valuable feature introduced in Revit 2017 (SHOULD THIS SAY 2017?) along with Calculated Value in Annotations feature. With this feature it is now possible to host the railings on Walls, Roofs or Slab Edges and the railings will adjust with variations in slopes and surfaces.

There are a host of other additions and updates in Revit 2017 apart from the ones listed above. It remains to be seen what if any flaws exist during real time use or if they truly result in the enhancements promised. Although, considering the supposed flaws that may exist, Revit 2017 is a huge step forward.

Posted in Uncategorized | Comments Off on Top 5 Features Added in Revit

Whither the World’s Fair?

The moniker “Expo 2017” is currently being bandied about in North America. In the US, various optimists, often plain vanilla citizens like you and me, have launched web sites and forums promoting a return of the world’s fair–or Expo 2017 in this case–to America. In Canada, at least four cites and/or organizations have recently promoted the idea of an “expo”, with one of the first efforts publicly unveiled in Montreal in 2007.

In America, the idea of a world’s fair–an officially sanctioned one, that is, will conceivably remain a distant dream until Washington comes to its diplomatic senses and rejoins the Bureau of International Expositions, or BIE–the governing body in Paris which awards world’s fairs in much the same fashion as the IOC decides who gets to hold the next Olympic Games. Just like the Olympics, an aspiring world’s fair applicant is required to invest a considerable amount of energy and expense putting together a bid, and, of course, impressing the appropriate officials. Unless, perhaps, you’re the city of New York which, after a clash with French dignitaries, decided to hold its 1964/1965 World’s Fair without BIE approval. At the time, superpower America had enough clout that many of the nations who were subsequently prohibited by the BIE from participating decided to show up anyway, posing as trade and tourist organizations.

Right after New York, and only a skip across the border, the city of Montreal staged what is often considered to be the most successful (and BIE approved) world’s fair of all time. Set on a sprawling venue of two man-made islands and a peninsula in the middle of the Saint Lawrence River, Expo 67 introduced a number of technological and cultural “firsts”–including the now ubiquitous moniker “expo” itself.

There are “expos” for everything now, from computers to kitty litter, while the mighty world’s fair that spawned these cheap imitations hasn’t been seen in North America for decades. Even if a city here managed to secure an official bid for “Expo 2017” it would be for a much smaller affair, a “recognized” expo limited by the BIE to 25 hectares exhibition area. That’s because there have always been two types of world’s fairs, a very large one (a “universal expo”) and, in-between, a smaller one (a “special expo”)–both of which are now, respectively, called “registered” and “recognized” fairs. In 2017, unfortunately, only the smaller recognized expo is allowed.

Nevertheless, I would argue that the world’s fair not only needs a major boost in North America, but that North America desperately needs another world’s fair. No other event has the collective potential to attract a huge audience to the latest cultural and scientific endeavours humankind has to offer. With our planet in the precarious state we have put it in, and North America no longer as influential and respected as it used to be, a world’s fair, properly staged and presented with the latest social and environmental initiatives, could be the political and technological beacon of hope this continent is yearning for. Of course, that might mean that Expo 2017 would need to encompass a great deal more than 25 hectares exhibition area and would need to address a lot more than the narrowly restricted theme (the fair’s purpose) officially allowed by the BIE for a smaller “recognized” expo. This could be done, with a little creative thinking (and without resorting to New York’s 1964 strategy), but that’s for another article to address.

Posted in Uncategorized | Comments Off on Whither the World’s Fair?

The Features Of Soccer Cleats

Soccer cleats refer to a firm ground soccer shoe, fitted with studs or cleats to provide traction on most grass surfaces and outdoor soccer fields.

The first soccer shoes were ordered by King Henry VIII in 1526 when he wanted another pair to play football with. One that was tougher than his ordinary shoes. As the game got formalized in the mid 19th century, so did the accessories one needed to have while playing the game, the most important of which were the football shoes.

Vulcanization of rubber was an important invention for the manufacture of cleats whose primary purpose was protection of the players’ feet. And so on from there, many innovations and generations later, football boots have come to represent the advancement of shoe making technology and materials and its importance in football, a game which enjoys absolute popularity amongst all the nations of the world. Today’s soccer cleat

Is not built so much for protection as for performance enhancement of the player! It does not even cover the ankle of the player. The cuts and organization of the studs are to suit different purposes. Amateur players use plastic studded cleats for hard ground. A wet ground requires detachable studs for better grip. These could be metal, plastic or rubber. Rubber soles are provided for indoor football shoes and there are special shoes for artificial turf.

Football blades where the studs have blades facing in different directions to minimize ankle injury to the wearer and deliver excellent grip are also an innovation that has drawn flak for causing a disproportionate number of injuries to other players.

A combination of synthetic fibers with or without leather is used for the upper, nowadays, with emphasis on the lightness of the boot. Carbon fiber as a new material, provides extreme lightness and is extremely flexible.

Additional features have been introduced like rubber ridges and shaping the boot for the ball enhance the player’s performance. There are shoes fitted with microchips that capture’s the player’s performance metrics and transmits it to a tablet or PC.

The latest is the environmentally friendly shoe, made with recycled and renewable material. This is also extremely lightweight.

Football cleats of the Future – Some interesting crystal ball gazing

· One young player predicts that the cleats of the future will have retractable studs, allowing him to use them as ordinary shoes· Autolacing capabilities which will be good – the wearer, after tying the laces steps back into the heel of the shoe. While stepping back, he pushes a lever which lock the laces in place. Then the lever is disconnected in case the player steps back again while playing.

· Recyclable material and carbon fibers used in building aircraft will definitely be the order of the day in creating lightweight boots that contain material used in the last world cup! Not only that, each pair of boots will be recycled and rebuilt to suit that customer’s requirements.

Boots that fit like a sock… such silhouettes will be more in demand for better performance and comfort.

Posted in Uncategorized | Comments Off on The Features Of Soccer Cleats

How Do I Discover My Purpose? Start By Asking Yourself These 3 Questions

One of the biggest questions I hear is, “What is my purpose?”

In reality, there are only two people who can really tell you what your purpose is you and God.

What is purpose?

Your purpose is the plan God has for you, the reason why He has created to live on this earth.

He can tell you because He created you and He made a specific purpose just for you. As you seek to know God more, and learn His plan for your life, you can discover this purpose. Contrary to what many people believe, you are not here just to take up space, meander around, watch reality TV, be miserable, or even eat chocolate.

God has so much more for you. He wants you to love your life by discovering your purpose and walking it out on consistent basis.

God also wants you to connect with Him and join Him where He is already working.

This requires you to be able to:
• Have a relationship with Him through faith in Jesus Christ
• Experience an intimate relationship with Him
• Learn to hear His voice

If you want to fulfill your purpose for 2017, I encourage you to take a quick mental inventory of what you have. Then 3 questions to ask yourself include:
• What 5 things do I want to change about myself in this year? This could include your job, a relationship, a personal goal, certain habits, etc.
• What people/things do I need to get rid of so I can pursue my purpose?
• What negative mindsets do I need to get rid of? If you are honest with yourself, you can experience areas of growth so you can pursue your purpose.

I would also recommend you find an accountability partner or hire a life purpose coach to help you to see where you are and how you can get closer to pursuing your purpose.

Posted in Uncategorized | Comments Off on How Do I Discover My Purpose? Start By Asking Yourself These 3 Questions